Aftermarket Slide Piece for use with EPIROC® P/N 3128 3074 88 (3128307488)
A polymer nylon slide piece engineered as a direct replacement for the EPIROC® / ATLAS COPCO® feed and carriage wear slide. Installed on drill rigs such as Boomer 281 / 282 / 353 and FlexiROC T35 / T40, replaced on a regular wear cycle.

Quick answer: Dimail supplies a direct-replacement aftermarket slide piece for use with EPIROC® equipment, cross-referenced to part number 3128307488 for identification. It is fitted to Boomer 281, 282 and 353 and FlexiROC T35 / T40 feed beams. MOQ is 1 piece, stock orders are dispatched from stock by international express, and quotations are returned within 12 working hours. Send the number on your old part to dimailmachinery@126.com for a quote.
Function & Application
The slide piece is a critical wear component mounted on the feed module assembly. It allows the rock drill carriage to travel smoothly along the feed beam while protecting the beam surface from direct wear.
Under constant percussion, vibration and dust exposure, the slide gradually wears down. Replacing it at the correct interval restores drilling accuracy, protects high-value feed beam components, and reduces unplanned downtime.
Symptoms of a worn slide piece
- Irregular or jerky feed movement
- Visible loss of thickness or uneven wear marks
- Increased vibration during drilling
- Scoring or galling on the feed beam surface
What the replacement restores
- Consistent feed force and drilling alignment
- Extended life of pistons, bushings and the feed beam itself
- Lower lubrication consumption and reduced maintenance cost
Product Video
Dimail slide piece — product video.
Part Number Cross Reference
Customers search for this component under several part number formats. All of the following refer to the same slide piece:
| OEM Reference | Format |
|---|---|
| 3128 3074 88 | OEM manual / service documentation |
| 3128307488 | Compact format, parts catalogs |
| 3128-3074-88 | Alternate search format |
Compatible EPIROC® / ATLAS COPCO® Drill Rigs
Installation location may vary by feed configuration and rig serial number. Always verify against your rig’s spare parts manual, or send us your rig model — we will confirm compatibility for you.
Underground drill rigs
- Boomer 281 | Boomer 282 | Boomer 353
- Boomer XE3 | Boomer K111 | Boomer S1D
- Boomer L2C | Boomer XL3 | Boomer L2D | Boomer M2D
- Boltec 235 | Boltec 235H | Boltec LC | Boltec MD
- Simba S7D
Surface drill rigs & drifters
- ROC D3 | ROC D7 | ROC D55 | ROC D65
- ROC L6 | ROC L8 | ROC T15
- FlexiROC T35 | FlexiROC T35R | FlexiROC T40
- SmartROC T35 | SmartROC T40
- COP 1838 / 1838ME / 1838HD / 1838HR drifters
Engineered for High-Wear Feed Systems
Each Dimail slide piece is manufactured with the demands of continuous drilling in mind:
- Low friction coefficient — smooth carriage travel, less heat buildup
- High dust abrasion resistance — stable service life in harsh drilling environments
- Controlled tolerances — repeatable dimensional accuracy, drop-in fit without rework
- Controlled wear pattern — predictable replacement intervals for maintenance planning
- Stable thermal expansion — consistent alignment under heat
Why Contractors Choose Dimail
- OEM-equivalent fit and function — installed on thousands of active rigs worldwide
- Significantly lower cost than genuine parts
- Ready stock — shipped worldwide by international express
- MOQ 1 piece — order a trial unit before committing to full sets
- Technical support — send your rig model and serial number, we confirm the right part
Technical Specifications
| Part type | Slide piece / feed beam wear slide |
| Replaces OEM P/N | 3128 3074 88 (3128307488) |
| MOQ | 1 piece |
| Lead time | Ex-stock; 5–9 days delivery worldwide |
Frequently Asked Questions
Will this slide piece fit my drill rig?
It fits all rig models listed in the compatibility table above. If your model is not listed, send us the rig model, feed configuration or a photo of the old slide — our engineers will confirm within one working day.
Can I order just 1 piece for testing?
Yes. Our minimum order quantity is 1 piece. Most customers start with a trial unit, then reorder as their wear cycle requires.
How does the service life compare with the genuine part?
The geometry and manufacturing tolerances are engineered to match OEM fit, function and performance. We can share field wear-life feedback from customers running similar applications.
How do you ship, and how fast?
Stock orders ship by international express (DHL / FedEx / UPS), typically arriving in 5–9 working days. Bulk orders can be consolidated by sea or air freight on request.
Can we order other wear parts together?
Yes. We supply a full range of aftermarket wear components — dust seals, gaskets, bushings, membrane diaphragms, protective sleeves and more. Send us your parts list for a combined quotation.
Request a Quote — Reply Within 12 Hours
Tell us your rig model and required quantity. For urgent orders, contact us directly at dimailmachinery@126.com.
We reply within 12 hours on working days. Your information is used for quotation purposes only.
Explore Dimail
EPIROC & Atlas Copco Aftermarket Parts Catalog Sliding pieces & wear pads | | Sliding piece 3128303930 — Boomer 104/281/282, Boltec, Roc D |